top of page
Search

How Much Gravel Do I Need for My Bay Area Project?

3 hours ago
3 min read

To figure out "How Much Gravel Do I Need?" Multiply the area in square feet by your planned gravel depth in inches, then divide by 324 to find the number of cubic yards you need. One cubic yard of gravel covers 162 square feet at 2 inches deep or 108 square feet at 3 inches deep.


Separate piles of large rock, gravel and decomposed granite at a TerraBay delivery site in Novato, California.
Rocks and decomposed granite delivered by TerraBay Materials in Novato, Marin County.

How to Calculate Gravel in Cubic Yards

Measure the length and width in feet and multiply them to get the square footage. For a curved path or a bed that changes width, break it into smaller sections, use an average width for each, and add their areas.

Cubic yards = square feet × depth in inches ÷ 324

A Worked Example for 500 Square Feet

A 20-by-25-foot area needs about 4.63 cubic yards of gravel at 3 inches deep (500 × 3 ÷ 324). Calculate each layer on its own if the project also calls for a base. For layers that will be compacted, confirm how much loose material you need before ordering.


Gravel Coverage Chart: How Much Gravel Do I Need

The chart shows how many cubic yards you need at each depth. For a simple garden path, 2 inches is a practical starting depth. Use your project’s specified depth for bases and drains. UC Master Gardeners’ gravel path guide.

Area

2 inches deep

3 inches deep

4 inches deep

100 sq ft

0.62

0.93

1.23

250 sq ft

1.54

2.31

3.09

500 sq ft

3.09

4.63

6.17

1,000 sq ft

6.17

9.26

12.35

Converting Gravel from Cubic Yards to Tons

A cubic yard measures volume. A U.S. ton measures 2,000 pounds. If the product is sold by the ton, multiply your cubic yards by the material’s bulk density in tons per cubic yard.

At an example density of 1.35 tons per cubic yard, 4.63 cubic yards would weigh about 6.25 tons. Use the density for the gravel you choose because stone type, size mix, and moisture affect the weight. Check the selling unit and minimum on the product page and use its material calculator where available.



Choosing Gravel for Your Project

  • For walkways and patios, small, angular crushed gravel tends to stay steadier underfoot than rounded pea gravel. For a firmer surface, look for a material designed to compact, such as a suitable decomposed granite (DG). Explore decomposed granite.

  • For borders and planting beds, use rounded pea gravel for ground cover or larger river rock for a more pronounced stone texture. Browse pea gravel and river rock.

  • For French drains, pick clean drain rock sized for your drainage plan. The open spaces between stones allow water to move. See 3/4-inch drain rock.

  • For paver and driveway bases, confirm the thickness and use the compactable material specified for your project. See Class II road base.


Handful and pile of 3/4-inch Madera Gray crushed gravel with a tape measure for scale.
A closer look at 3/4-inch Madera Gray gravel. The listed size describes the stones themselves.

Planning Your Bay Area Gravel Delivery

Separate piles of gray drain rock and road base beside a TerraBay dump truck at a Walnut Creek job site.
Drain rock and road base delivered in separate piles in Walnut Creek, Contra Costa County.

TerraBay Materials delivers loose bulk gravel to homes and job sites. Our main delivery areas are Marin County, Contra Costa County, and Alameda County. We also serve Sonoma County, San Mateo County, San Francisco, and parts of Solano County. Confirm coverage for your address and material on our delivery areas page.

Pick a flat, firm unloading spot with room for the truck and the pile. Check for overhead wires and branches, and tell us about steep grades, narrow roads, tight turns, or gates before ordering. If access is tight, send photos of the approach and the proposed drop spot. Read our delivery and unloading requirements.


Frequently Asked Questions

Coverage Per Ton of Gravel

At 1.35 tons per cubic yard, one ton covers about 120 square feet at 2 inches deep. For your own estimate, divide one ton by the product’s tons per cubic yard, then multiply by 162 for coverage at a 2-inch depth.


Rounding Up to a Whole Yard

Check the product minimum and the quantity options at checkout. If your estimate is 4.63 cubic yards and the product is offered in whole yards, 5 cubic yards is the first option that covers the calculated volume.


Ordering Road Base and Gravel Together

Send us both quantities and the delivery address before checkout. Different materials may require separate loads and orders, depending on the products and delivery arrangements.


Shop Bulk Gravel for Your Project

Shop bulk gravel and crushed rock to compare stone sizes and check your ordering options. If you want help estimating a quantity or checking truck access, send us your dimensions, planned depth, and delivery ZIP code. Contact TerraBay Materials.

 
 
 

Comments


  • Instagram
  • Facebook
  • Youtube
  • TikTok
  • Pinterest
  • Twitter
bottom of page